Earn 549 loyalty points

Walrus Audio Special Edition Nautical Pedal Set - ARP-87, Fathom & Deep Six

Exclusive to Andertons in Europe.. Custom "Nautical" graphics.

Description

What's Included

  • 1 x Walrus Audio Special Edition Nautical ARP-87 Multi-Function Delay
  • 1 x Walrus Audio Special Edition Nautical Fathom Multi-Function Reverb
  • 1 x Walrus Audio Special Edition Nautical Deep Six V3 Compressor
Written by

Chris Toft

New for 2021, the Walrus Audio ARP-87 Multi Function Delay, Fathom Multi Function Reverb and Deep Six Compressor pedals are available as an exclusive special edition set with nautical-themed graphics! Exclusive to Andertons in Europe and with highly-limited quantities available, these unique pedals are sure to be snapped up quicker than krill at a feeding frenzy — so don't miss out!

Catch of the Day! - Chapman ML1 Red Sea & the Walrus Audio Nautical Pedal Set!

Here's what Walrus Audio say about the ARP-87 Multi Function Delay

The ARP-87 is a compact, feature-rich delay, packed with a large pallet of inspirational delay tones. Featuring four main algorithms, digital, analog, lo-fi, and slap back, the ARP-87 can cover some serious ground in the world of echoes. The Digital algorithm boasts pristine, crystal clear repeats great for rhythmic riffs.

The Analog setting works well to add warmth and dimension to chords and lines without getting in the way. The Lo-Fi algorithm, with its adjustable frequency range on the repeats, goes from warm, warped, and murky, to strait AM radio. Finally, the Slap setting makes it easy to dial in a great slap back echo perfect for smoking chicken pickin’ runs. With other features like our smart bypass switching, and momentary knob ramp, the ARP-87 provides endless creative opportunities that are waiting to be explored.

The X knob changes functions depending on which Algorithm you are using. It adjusts a specific parameter in each algorithm. In Digital, Analog, and Slap modes, the knob will control modulation depth. In Lo-fi mode, the knob will control Filter width.

Note that when changing delay types this loads a whole new algorithm and the tempo must be tapped in again.

Trails Mode

The ARP-87 can be run in trails or no trails mode. In trails mode, when you turn the pedal off, the delay trails die off naturally. In no trails mode, the delay trails are abruptly cut off when you turn the pedal off. To toggle between either mode, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

Momentary Functions

When the switch is in off position, press and hold the Bypass Switch to temporarily activate the effect to add a moment of delay texture. Releasing the switch turns the effect off. When the effect is on, press and hold the bypass switch to momentarily ramp the X parameter to maximum. Releasing the switch sets the X parameter back to the knob location.

Press and hold the Tap Switch to temporarily ramp the feedback to maximum. Release to set the feedback back to the knob location.

Specifications

  • The diecast enclosure’s exact size is 4.77" x 2.6" x 1.39"
  • Power requirements are 9VDC (100mA minimum)
  • The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.

Fathom Multi-Function Reverb

The Fathom is a feature-rich reverb with 4 different customized reverb algorithms to choose from. Easily go from tasteful, small room reverb to long, modulated trails dripping of ambient goodness. The toggle switch adds options for low, medium and high modulation. Use the dampen knob to fine tune the tone of the reverb's decay.

The Fathom features 4 different algorithms.

Hall - Wide, open and vast with decay that ends with high-frequency rolloff. X knob adjusts pre-delay.

Plate - Full Body reverb with a smooth decay. X knob adjusts pre-delay.

Lo-fi - Filtered reverb with decay ranging from warm, to thin AM-sounding radio. X knob adjusts filter width.

Sonar -  Reverb fed with both a high and low octave with the ability to blend the octaves with the X knob.

Momentary Functions:

When the pedal is in off position, press and hold the Bypass Switch to temporarily activate the effect to add a moment of reverb. Releasing the switch turns the effect off.

Press and hold the Sustain Switch while the pedal is on, to sustain the reverb decay for a dreamy ambient decrescendo.

Trails Mode:

To turn trails mode on or off, unplug the pedal and press and hold down the Bypass Switch for two seconds while plugging the pedal back in.

Specifications

  • The diecast enclosure’s exact size is 4.77" x 2.6" x 1.39”.
  • Power requirements are 9VDC (100mA minimum).
  • The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
  • Power supply not included.

Deep Six V3 Compressor

Updated in all the right places for top notch tone and playability.  

Updates to the V3 are as follows:

  • Added Tone knob (bass cut) for the ability to shape the low end of your guitar signal.
  • Soft switch/relay bypassing for smoother more reliable operation.
  • Moved to top mounted in/out jacks.

The Deep Six is a true bypass studio-grade compressor in stomp box form, inspired by the performance of the Universal Audio 1176 with the simplicity of the Ross and Dynacomp. Offering a Level, Sustain, Attack, and Blend control, the Deep Six will give you unmatched versatility at a price you can afford.

Polarity will never be an issue as the Deep Six comes standard with a polarity correction circuit. The internal voltage is doubled to 18 volts giving you the maximum amount of headroom for your sound while maintaining a typical current draw of 8.9mA.

The Deep Six also offers a Blend and Attack control which allows you to use the pedal with active pickups or humbuckers. The blend feature allows you to use high output instruments while truly being able to dial out any distortion that may be present.

Specifications

  • 9V DC 8.9mA – 4.77 x 2.9 x 2.3 inches.
  • The use of an isolated power supply is recommended for powering all Walrus Audio Pedals. Daisy chain power supplies are not recommended.
  • Power supply not included.
Specs
Finance
Reviews
Delivery
£549.00
Inc. VAT

10+ In Stock

Order now for delivery to you on Thursday, 2 December 2021  

Free UK Delivery

Add To Cart

Andertons Music Co. Payment Methods - V12, Mastercard, VISA, Amex, Paypal More ways to pay

Credit & debit cards, Paypal and Instant Finance

Fast & Free UK Delivery

Fast shipping with reputable couriers. Next day & free to most UK postcodes when in stock!

Click And Collect

Just 10% deposit. Pay the rest on collection. No delivery charges. Same price online & in-store!

£18.8 Million Gear In stock

At our store & UK warehouse, ready to ship direct to you!

Andertons Music Co. Feefo Gold Rating for customer service! Unbeatable Customer Service

Based on independent reviews.

SKU:_BUN-WALRUS-NAUTICAL