Bad Cat Unleash V3 Reactive Load Box, Attenuator & Power Amp

We’ve all been there. Some guitar amps only really come alive when they're being pushed hard, while others sound their best at more modest volumes. The Bad Cat Unleash V3 solves both problems in one clever box.

Combining a highly transparent reactive load attenuator with a powerful 100W solid-state power amp, it lets you turn loud amps down and low-wattage amps up, all without compromising your core tone.

Your tone, unleashed!

The beauty of the Unleash V3 is that your amp remains the star of the show. It doesn't colour your sound or add its own character. Instead, it gives you complete control over your volume, so you can enjoy your amp at its absolute sweet spot whether you're practising at home, recording in the studio or playing a packed-out venue.

Three tools in one: attenuation, re-amplification & DI

The Unleash V3 is much more than a simple attenuator. It's a flexible utility designed to get the most out of any valve amp.

• Turn it down (transparent attenuation): If you're running a high-powered head, the Unleash V3 acts as a reactive load attenuator, soaking up excess volume after your power tubes have saturated. That means you can enjoy the feel, dynamics and harmonic richness of a cranked 100W amp at sensible, bedroom-friendly levels.
• Turn it up (100-watt re-amplification): Using a low-wattage boutique combo or lunchbox head? The Unleash V3 can re-amplify its fully turned-up tone through a transparent 100W power amp section, giving your favourite low-powered amp enough headroom and stage volume for rehearsals and big gigs.
• Go direct (PurePath analogue DI): Need a consistent signal for live sound or recording? The onboard PurePath analogue DI delivers an authentic speaker-simulated signal via XLR, helping you send your tone straight to front-of-house or your audio interface without unwanted latency or digital processing.

Serious flexibility

The Unleash V3 is packed with practical features that make life easier both on stage and in the studio:

• Post-power amp FX loop: Place delays, reverbs and modulation effects after your amp's saturated power section, even if your amplifier doesn't have its own effects loop.
• Dual footswitchable channels: Instantly switch between rhythm and lead volume levels while keeping your core tone unchanged (footswitch included).
• PurePath XLR direct output: Send a consistent analogue signal to front-of-house or your recording setup, complete with selectable Edge and Centre cabinet voicings.
• Headphone output & multi-impedance support: Practise silently at home and pair the Unleash V3 with a huge range of amps and speaker cabinets.

It doesn't matter if you're trying to tame a roaring 100-watt stack or make a low-powered amp gig-ready, the Bad Cat Unleash V3 gives you the freedom to get the sounds you love at exactly the volume you need.

• Dual-function attenuator & re-amplifier: Whether you're trying to tame a roaring valve head or boost a low-wattage combo for the stage, the Unleash V3 lets you get the best from virtually any amplifier without sacrificing its character.
• 150W reactive load with multi-impedance compatibility: Supporting 4, 8 and 16-ohm amplifiers, the reactive load preserves your amp's natural feel and response while allowing you to play at much more manageable volumes.
• Ultra-transparent 100W re-amplification stage: Turn a fully cranked low-powered amp into a show-ready powerhouse. The clean 100W power section adds volume and headroom without colouring your carefully dialled-in tone.
• Input trim control with clip indicators: Easily optimise the signal feeding the Unleash V3. The built-in LED indicators help you achieve the perfect level for maximum performance and clarity.
• Dual footswitchable channels: Switch seamlessly between rhythm and lead levels with independent Volume, High and Low controls for each channel. A dedicated footswitch is included for easy operation on stage.
• Post-power amp FX loop: Place your delays, reverbs and modulation effects after your amp's driven power section, even if your amplifier doesn't include an effects loop of its own.
• PurePath balanced XLR direct output: Send a consistent analogue signal straight to front-of-house or your recording interface, with selectable Edge and Centre cabinet voicings for added flexibility.
• Dedicated headphone output: Enjoy authentic cranked-amp tones without disturbing the neighbours! An independent headphone volume control makes silent practice quick and convenient.
• Dual speaker outputs: Connect multiple cabinets with ease and build a setup that suits your stage or studio requirements.

• Power Handling: 150W Reactive Load / 100W Power Amp
• Inputs/Outputs: 1/4" Amp Input, 1/4" FX Loop (Send/Return), XLR Direct Out, 1/4" Headphone Out, (2) 1/4" Speaker Outs, 1/4" Footswitch Jack
• Dimensions (H x W x D): 4 x 10 x 9 inches / 101.6 x 254 x 228.6 mm
• Weight: 8.5 lbs / 3.86 kg