Replacing your drum heads is a great way to restore the sound of drums that have lost their punch and give new power to your kit. Improving your drums' sound can make a huge difference to your play. Whether your kit is fresh out of the box or practically antique a new set of heads that are designed for your style can really increase the quality of your tone.
Here's what Evans have to say about this head
Coated Emperor® heads are warmer and more durable than Clear Emperor®s. They’re made with two free-floating plies of 7-mil Mylar® film, which gives consistent open warm tones which accounts for their popularity among many of today’s Studio, Pop, R&B and Rock drummers.
- Type: Tom
- Diameter: 18"
- Finish: Coated
- Skin type: 2 ply 7 Mil
- Ported: No
- Dotted: No
Basic Guide to heads
There are 2 kinds of head on each drum. The side that you hit is the batter head while the bottom skin is a resonant head.They come in single- or two-ply (1 or 2 layers of material) construction in a variety of materials and finishes.
You get an increased resonance and sustain with one-ply heads, while heavy hitting music can sound better on the heavier double-ply heads.
The drum head's thickness is another thing to consider. Thinner, single layer heads have a sensitive response, with bright, resonant sound and complex overtones.
Thicker single-ply heads are more durable and have a higher tuning range with less sustain and more attack than thinner heads.
Two-ply heads have less attack and a quicker decay for a focused tone. They can take a serious pounding so if you're slamming away with a double pedal this might be your best choice.
Some batter heads have a dot affixed to the top or bottom of the head to muffle excess ring. This gives you a more focused, drier sound. Some players still put a line of duct tape on to achieve this same effect but the results are unpredictable and it really spoils the look of the kit.
Note: If you use brushes you're going to want to stick with heads using dots on the head's underside to avoid snagging a bristle.
Drum heads with a white or black coating give a subtle muffling effect. Some have internal sound rings embedded around their outer perimeter to control excess ring.
Many jazz drummers put clear heads on the toms and a classic white-coated head on the snare drum, as the texture of a coated snare head sounds better with brushes. The bottom head on the snare drum is known as the snare-side head, a transparent, extra-thin head that maximizes response to the snare wires.
Bass Drum heads
Bass drum heads can include an internal dampening system on the batter head to provide a controlled sound and a port hole for improved tone and to make it easy to fit a mic. Port hole protector rings are also available to prevent your drum head from ripping or denting when fitting a mic.