After introducing the popular TightMetal Pro™ and BigRock Pro distortion pedals in 2014, Amptweaker started working on the 2 button version of the popular TightDrive™ pedal. With its included Fat and Smooth switches, the TightDrive Pro™ can get great drive tone, and with the Gain switch turned OFF, transparent overdrive tones are plentiful.
2 Boost channels
Unlike most 2-button overdrive pedals with boost, the TightDrive Pro includes 2 Boost knobs, one before and one after the distortion.....so it’s easy to boost the gain AND volume, for the perfect solo tone. There’s also a Midboost button that works with the output Boost knob, to help solos cut through the mix.
The TightDrive Pro has a Smooth Edge switch which cuts the high end sizzle for a warmer edge or adds clarity when it's OFF, depending on your perspective. There are also 2 Fat switches for the rhythm and/or Boosted tones to have a thicker attack with a bit more compression, by extending the lowend to a more normal range. The added three band EQ allows for much tonal variation, with its PlexEQ button for more traditional stack tone. A new 'cleaner' noise gate was developed for the TightDrive Pro, which is designed to reduce noise while maintaining the cleaner tones it's capable of.
3 Effect Loops
Amptweaker pedals are known for effects loops, and this one has 3, yes that’s right 3: a universal loop, another active with the boost, and Amptweaker’s popular SideTrak loop which activates when the pedal is OFF, to automatically shut off clean effects.
It can be used to add a compressor, chorus or chain of effects that only works when you play clean, or to switch to another distortion pedal to use for an alternate rhythm sound...all without having to hit more than one switch....it’s like having a built-in A/B box. A green LED alternates with the normal red one to indicate that the loop is active when the pedal is bypassed.
Another cool SideTrak trick is that if you only plug in the SideTrak Send, and don't plug in the Return, then that Sent dry signal can be sent to another amp.....meaning you could have the TightDrive Pro driving your 412 halfstack while sending the clean tone to a Twin or some other clean amp. All this ability comes from two simple jacks on the side of the pedal
- Dual Lit Boost controls via Boost footswitch
- 3 Band EQ, w/ Smooth Edge sw. and PlexEQ sw.
- 3 effects loops....Universal, Boost with Pre/Post switches, and the SideTrak loop that works when the pedal is OFF! Patch in clean effects
- Gain, Tight & Volume Controls
- High Gain switch for overdrive tones, off for cleaner transparent boost tones
- Noise Gate switch, with internal adjustment, tracks gain
- Mid switch with PlexEQ setting
- Mid Boost switch tweaks Boost to punch through
- Internal Fat switches for warmer Rhythm and/or Boost tones
- Can be used as a preamp, or into the front of your amp
- LED lit knobs when using a power supply
- Battery disconnect switch with red indicator
- Runs on 9V-18V batteries or supplies–like 'variacing' your amp up and down, or similar to 50W versus 100W tone
- Current: 18mA with 1 or 2-9V batteries, 22mA with 9V adapter, 24mA with 18V adapter(adapters add knob LEDs....internal switch disconnects 1-9V battery clip
- DC Adapter jack, standard 2.1mm X 5.5mm, center ground(-)
- Magnetic Battery access door opens w/o tools
- Weight: 3 pounds, Dimensions: 5.625"W X 5"D X 2.125"H
- Handmade in the USA