Adam Audio A7X Speaker Pair & Adam Sub7 Bundle

What's Included?

• x2 Adam A7X Active Studio Monitor
• Adam Sub 7 Pro Subwoofer
• Tourtech Studio Monitor Stand Pair
• x4 Tourtech 6m Microphone Cable

Here's what Adam say about the A7X Nearfield Monitor

The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the world's largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.

With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.

Driver technology

The first aspect that distinguishes the old from the new model is the X-ART tweeter. The 'X' stands for 'eXtended frequency response' and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7" midwoofer. It has been redesigned with a much bigger voice coil (1.5") and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (+/- 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Here's what Adam say about the Sub 7

Our subwoofers are dedicated to ADAM Audio's primary goal: the best possible authenticity in the reproduction of music. For our subwoofers, this means combining power and precision while simultaneously avoiding "impressive" bass volume at the cost of accuracy. Their task is it to complement the highly acclaimed lucidity and transparency of the ADAM monitors in the lower and lowest frequencies.

All subwoofers up to the Sub2100 feature both balanced (XLR) and unbalanced (RCA) in and output connectors, and numerous controls to adapt to different room acoustics and requirements.

"I recommend it highly to anyone looking for a top-notch subwoofer." Tape Op on the Sub12 (Feb/March 2009)

Panel/Controls

All subwoofers up to the Sub2100 feature a number of controls to adapt to different room acoustics and requirements.

All units have a level control that varies from -60dB to +6dB, a phase +/-180 degrees switch and variable upper frequency barrier control (50-150Hz), a switchable 85Hz high pass filter for the satellite output. In addition, there is a 'signal-on/continuous' switch. This provides the option of automatic power up whenever the subwoofer receives a signal and automatic power off after 15 minutes of no signal.

Sub7

The Sub7 has been designed to complement smaller monitors like the AX-Series'models A3X, A5X, and A7X. Its small footprint allows for an easy placement even in small environments.

The front panel features two motorized potentiometers that let you adapt the input level and crossover frequency settings for the best performance. These pots can also be controlled with an included wireless remote control, allowing you to optimize your sound reproduction from your ideal listening position.

Connectors and controls

The Sub7 is equipped with both balanced (XLR) and unbalanced (RCA or Cinch) in and output connectors and numerous controls. A 0 degrees/180 degrees phase switch and a switchable 85Hz highpass filter allows you to find the best settings for an ideal sound and performance.

Combining depth and precision

The low cut off frequency of 32Hz (-3dB point) enables this subwoofer to reproduce register of even this range in a highly authentic manner.

A7x Specifications

Mid-Woofer

• Number: 1
• Basket: 7" (175 mm)
• Voice coil: 1.5" (38 mm)
• Cone material: Carbon/Rohacell/Glass Fiber

Tweeter

• Number: 1
• Type: X-ART
• Diaphragm area: 4 inch² (2420 mm²)
• Equiv. Diaphragm: 2" (56 mm)
• Velocity transform ratio: 4:1
• Diaphragm weight: 0.17 g

Built-in Amplifiers

• Mid-Woofer: 1
• Type: PWM
• Amp. power RMS / music: 100 W / 150 W
• Tweeter: 1
• Type: A/B
• Amp. power RMS / music: 50 W / 75 W

Control panel

• Input Sensitivity: - to +14 dB
• High shelve > 5 kHz: +/-6 dB
• Low shelve < 300 Hz: +/-6 dB
• Tweeter gain: +/-4 dB
• Input connectors: Analog: XLR / RCA

General data

• Frequency response: 42 Hz - 50 kHz
• THD 90dB/1m > 100 Hz: 0.5 %
• Long term output: 106 dB
• Max. peak: 114 dB
• Crossover frequencies: 2500 Hz
• Input impedance: 30 KOhm
• Weight: 20.3 lb (9,2 kg)
• Magnetically shielded: No
• Height x Width x Depth: 13.5" (337 mm) x 8" (201 mm) x 11" (280 mm)
• Warranty: 5 Years

Sub 7 Pro Specifications

Subwoofer

• Number: 1
• Basket Ø: 7" (178 mm)
• Voice coil Ø: 1.5" (38 mm)
• Cone material: Paper

Built-in Amplifiers

• Subwoofer: 1
• Amp. power RMS / music: 140 W / 210 W

Control panel

• EQ 80 Hz: -60 to +6 dB

Input connectors

• Analog: XLR / RCA

General data

• Panel: Front
• Frequency response: 32 Hz - 150 Hz
• THD > 60 Hz: ≤1 %
• Max. peak: ≥107 dB
• Crossover frequencies: 50 - 150 Hz
• Input impedance: 10 KOhm
• Weight: 17.6 lb (8 kg)
• Height x Width x Depth: 14.5" (370 mm) x 8" (200 mm) x 11" (280 mm)
• Warranty: 5 Years

Included in the box

• Remote control
• Batteries (3 x AAA)
• Power cord
• Manual