Walrus Audio Monumental Stereo Harmonic Tap Tremolo Pedal in Black

Building off the rich, warm, pulsating modulation of the Monument, the Monumental Harmonic Stereo Tremolo is an analogue, optical tremolo bringing upgraded control & features.

Check this out – with the Monumental you can save presets, blend between standard and harmonic tremolo modes, adjust wave shape and tap division options and most importantly, use the pan control to set the stereo spread of the tremolo to the right and left channels.

Key Features

• Save Presets - The ability to save and recall three on-board presets, as well as a "live" mode
• Express Yourself - Full expression control over every parameter
• An additional wave shape and tap division
• See How it Pans Out - Pan control to allow the tremolo to sweep from left to right!

Inspired by the beautifully jagged, red-sand desert landscape of Monument Valley, the Monumental Tremolo is capable of blending between harmonic and standard tremolo to produce rich, luscious, warm pulsating modulation capable of peaks and valleys as smooth or as jagged as the real ones!

Controls

• PAN: Control the stereo spread of the left and right channels. Counterclockwise is your standard tremolo sound, the left and right channels have the same LFO. Turning the control clockwise will offset the phase of the right LFO to introduce stereo spread. Fully clockwise is maximum panning with the right channel LFO being 180 degrees out of phase from the Left LFO.
• S-B-H: Use this control to blend between standard and harmonic tremolo modes. In standard, all frequencies get affected at the same time. In harmonic, the high and low frequencies are offset from each other - When high is on, low is off and when high is off, low is on.
• PRESET: The Monumental has three onboard presets with an additional live mode. Each preset can save and recall every parameter available on the pedal. Press both the bypass switch and tap tempo switch simultaneously to cycle through the available presets (Red, Green, Blue, with White being "live").

When you are on a preset and you change a parameter, the bypass LED will change colour to purple, indicating a change has been made. You can then turn the control and the bypass LED will return to the preset colour when the control is at the saved position. Once you have determined what sound you want saved for the preset, hold down both footswitches to save the preset (the bypass LED will return to the preset colour). Live mode will always return to the current knob positions on the face of the pedal.