TK Audio MS Station Mid Side Processor

It’s designed to cover all the needs of every producer/engineer who wants to maximize their use of mid-side processing for enhanced stereo width; tight, focused mono-bass, and more. Its four discrete functions are divided across two linkable control sections for intuitive use, and its advanced cue section makes monitoring a breeze.

Parallel insert with M/S function: 

With the insert section you can insert an external processor like an eq, compressor, distortion unit etc, and then dial in a mix between the processed signal (wet) and the unprocessed signal (dry). For maximum precision the blend control has 16 steps from dry to wet. If you activate the M/S function your signal will be coded into mid (L+R) and side (L-R). The mid signal normally contains all the centre info such as bass, kick drum, lead vocal etc and the side signal contains all the panned parts of the signal.

Elliptical Equalizer: 

With the elliptical EQ all frequencies below a selected frequency will be made to mono. This function can make your low end more focused. It’s an old technique used when mastering for vinyl. Too much low end in the side channel (vertical) can make the needle bounce slightly and cause distortion. By using a 12dB high pass filter in the side channel you set the frequency under which the signal will be processed as mono. As a HPF introduces phase shift to the signal, a phase correction is added to the mid channel keeping channel separation as good as possible. The EEQ has 16 frequencies from 36Hz to 302Hz. With the EEQ cue function you can monitor the signals that are mixed between the channels.

Stereo width control: 

By adjusting the amount of side information in the stereo mix, the width can be adjusted incrementally from mono to extra wide. With this control you can fine adjust the stereo image after you have used the M/S insert.

Specifications:

• Max input and output: +26dBu
• Dynamic range: 119dB
• Frequency response: 20Hz – 80kHz +/-0,1dB
• Insert section
  - THD+N Dry: 0,00022% @ +4dBu / 0,00015% @ +20dBu
  - THD+N Wet: 0,00025% @ +4dBu / 0,00015% @ +20dBu
  - THD+N M/S Wet: 0,0004% @ +4dBu / 0,0004% @ +20dBu
  - S/N Dry @ +4dBu: 103dB
  - S/N Wet @ +4dBu:1 02dB
  - S/N M/S Wet @ +4dBu: 97dB
• Elliptical EQ section:
  - THD+N: 0,0004% @ +4dBu / 0,0004% @ +20dBu
  - S/N: 98dB
  - Crosstalk: Better than 70dB
• Width section:
  - THD+N: 0,0003% @ +4dBu / 0,0003% @ +20dBu
  - S/N: 98dB
• All sections active:
  - Dynamic range: 115,5dB
  - THD+N: 0,0005%
  - Power consumption: 15VA
  - Voltage: 115v or 230v selected via an internal