Kali 6.2 Dual 6 Inch Subwoofer

The WS-6.2 is a studio subwoofer with two 6.5-Inch horizontally opposed woofers. Taking up less than half the space of comparably performing subwoofers, it is ideal for stereo mix setups where space is at a premium. The WS-6.2 is tailor made to be a companion sub to Kali’s LP-Series and IN-Series monitors, but it will also integrate well with just about any pair of studio monitors.

The WS-6.2 is only slightly larger than an 8-inch studio monitor, making it the perfect choice to sit under your desk, or in other tight spaces. The horizontally opposed woofers in the WS-6.2 present as much radiating area as a 10-Inch woofer, but in a much smaller package.

As an added benefit, the configuration of the woofers cancels out net vibration, so the sub won’t scoot, buzz, or rattle, even at high SPLs.

With 120 dB max SPL, the WS-6.2 will be more than sufficient for most stereo setups, and will work well in small multichannel setups as well. If more SPL is needed, a second WS-6.2 can be added without taking up very much space. You can also look at using our larger WS-12 Subwoofer.

Key Features:

• IO & Control:
  The WS-6.2 Features balanced inputs for either XLR or TRS cables, as well as unbalanced RCA inputs. The 80Hz Crossover can also be used to extend the low end response of your monitors.
• Foot Switch Control:
  A footswitch can be used to turn the sub on and off. When switched off, the XLR outputs will send a full range signal to your studio monitors.

Specifications:

• Power: 400W AC (1000W Peak)
• Drivers:
  2x 6.5” High Excursion Woofers
• Frequency response: 27Hz – 200Hz
• Recommended Listening Distance: 4m
• Max SPL: 120dB (Peak at 1m)
• Stereo Inputs:
  RCA (Unbalanced, -10dBV)
  Stereo XLR/TRS (Balanced +4dBu)
• Other input: 1/4” Footswitch Jack
• Output: XLR (Balanced)
• Dimensions:
  Height- 14.5” / 40cm
  Width- 12.2” / 36.8cm
  Depth- 11” / 36.8cm
  Weight- 31lbs / 14Kg