Ashdown AAA-300-210T Lightweight 300w 2 x 10" Bass Combo

Sometimes you want a practice amp you can crank up to 11 and use to rehearse with your band as well. Well that is where the AAA-300-210T comes through as a great choice. Rated at 300w and fitted with a pair of clear 10" speakers you can use this amp everywhere from the bedroom to the stage.

Simple, Straightforward Tone

When you are practising you don't want to have to spend your time worrying about a large amount of gear. You just want your tone in a box ready to go at a moments notice. That is not to say that you don't want control though. Sometimes you need more than a simple 3 band EQ and a gain control which is where this amp comes in to its own.

Using a powerful 4 band EQ with sweepable mids as well as different vintage and modern modes for the higs and lows you can achieve a lot in this amp. Add on the drive controls and AppTek mix control which lets you dial in just how much you want to change your signal with the AppTek modelled amps and pedals.

AppTek 

By connecting up your phone to the AppTek port you unlock a lot of different possibilities. Not only do you have a modelled version of their incredible ABM amps but also a wide selection of different effects pedals. This way you can easily access a much larger range of EQ, overdrive, modulation, delay and compression settings than what is on the front panel of the amp.

Hard Wearing, Long Lasting

Ashdown amps are known for lasting a long time and that comes down to the AAA series as well. With this amplifier you do not have to worry about it failing while in the middle of practice. It will just keep on working for many years to come.

Here's what Ashdown say about the AAA-300-210T

The Ashdown AAA EVO 300-210T is a robust and powerful 300 watt bass amp combo with a 2 x 10" Ashdown speakers. The 300-210T features a fully loaded array of facilities including passive and active inputs, as well as a balanced Di output and tweeter.

The Ashdown AAA EVO 300-210T has the option for an extension speaker out with its own dedicated 8 Ohm min load combi speakon/jack socket. This can be paired with the all NEW AAA-115T cabinet to benefit from the full 300 watts for larger gigs.

The Ashdown AAA EVO 300-210T features a re-energised foot switchable tube emulated overdrive for devastating distortion, as well as a 4 band EQ section with a sweepable mid control. The addition of a Vintage/Modern Low push button changes the character of the low end for either a deep vintage feel or a more modern punchy low end. In a similar fashion, on the high end, the Vintage/Modern Highs push button adds or takes away a high end presence.

On the rear of the combo, there is a Tweeter mute switch to reduce some of the top end and a speaker mute switch and headphone socket for silent practice. There is also a balanced DI XLR socket, an FS-1 footswitch jack socket and a Line in and an FX loop for use with either a line level device or FX processor/pedal board. Lastly, the amp has an extension speaker out with its own dedicated 8 Ohm min load jack socket allows for the combo to be extended with the AAA-115T cabinet

Download Ashdown's signature ABM Pre App (available via Agile Partners Amp Kit) and switch on the incredible features that you get from the formidable ABM range including Sub Harmonics, Tube Drive, Compression and comprehensive 7 Band EQ, thus transforming the amp into a tone machine.

Most prominently, the Ashdown AAA EVO Range has been upgraded to a premium heavy-duty buffalo Tolex covering with a stylish and distinctive vintage red grill. The Ashdown AAA EVO Range maintains its build quality and durability but utilises a new lightweight ply construction that has cut down on the weight but not the tone.

Specifications

• Power Output:  300 Watts
• Speaker Configuration:  2 x 10” + HF Tweeter
• Speaker Outputs:  Jack
• Frequency Response:  -3db at 22hz and 25khz
• High Instrument Input:  Impedance - 3.9M Ohm Input range 150mv to 20v p - p
• Low Instrument Input:  Impedance - 10k Ohm Input range 300mv to 40v p - p
• Line Input:  Yes with mix control
• DI Output:  XLR
• Impedance:  8 Ohms
• EQ:  Bass, Hi-Mid, Lo-Mid, Treble & Variable Mid Sweep
• Weight (kg):  17kg