EarthQuaker Devices Afterneath Reverb v2
The EarthQuaker Devices Afterneath pedal is a massive sounding reverb machine that uses multiple short reverbs to create a full, haunting sound for the ambient player. With enough controls to set up every aspect of the pedal the Aftermath is an amazing choice for when you really want to experience how far a reverb can go.
This is Version 2 of the Afterneath with a soft switch for sustained on/off use. The top-loaded jack inputs also make it pedalboard friendly so you dont have patch cables taking up real-estate on either side of the pedal.
So Much Control
While this pedal will always have the heavily atmospheric and cavernous tone to it with the built in controls you can dial in just how extreme you want it to be. Length, Diffuse, Dampen, Drag, Reflect and Mix controls all set exactly how this pedal sits in your rig. From a subtle and short reverb that still hits you multiple times to amazingly huge, repeating reverbs that you won't find in many others.
Wide Range Of Tones
With all of these controls available to you setting up anything from a standard reverb to a pulsing, self oscilating wall of verb. Really the sky is the limit with this pedal as sounds that you could only really get by matching up a whole bunch different reverbs in to one long chain.
Here's what EarthQuaker say
The Afterneath sounds a lot like it looks – a wizard in a cave in a box. You are the wizard – or sorceress, if you prefer – and the cave is your instrument’s signal, vast, expansive, and magical. Do you go inside? Roll a D20 to proceed!
- Highly tweakable otherworldy reverberator
- Can act as both a glitchy, cascading delay or a vast ambient reverb machine
- From short reflections to endless spaces, it’s all there and then some!
- True bypass soft-click switching
- Top-mounted jacks - for effortless pedalboard implementation
Once inside, a reflection of light from an unknown source catches your eye, and you notice a bizarre sheen on the walls of the cave. You timidly inch closer to the walls of the cave. Placing your hand gently on the cavern wall, you feel the rock move. The cave is alive! Alarmed, you emit a loud gasp, which reverberates throughout the subterranean landscape. Upon further listening, it appears as though the reverberations of your voice are in fact a swarm of short digital delays which may be used to create wild and cavernous reverbs, or scattered, short, rhythmic delays with bizarre characteristics.
Take a moment to consider your Intelligence and Wisdom scores, as well as your spell inventory before proceeding further. You have six spells at your disposal. Will you cast “Length,” which controls the decay and length of the reverb?
What about “Diffuse,” which adjusts the spread of the reverb? With your wand (or just the knob) turned counter-clockwise, the reverb is sharper with more attack, resulting in a stuttering sputter of individual early reflections. Clockwise casts a washy, more ambient-sounding spell.
Overwhelmed by fear, you hastily cast “Dampen!” As you shout the incantation, you notice that the clockwise variation of this spell results in brighter tones, while as you rotate your wand counter-clockwise; you hear darker tones with a mellower top-end. It’s almost as if your magic changes the hardness of the cavern walls, and thus the tonal characteristics of the reverb!
Elsewhere in your book of spells is “Drag,” which separates the individual digital delay lines, literally dragging them through the very fabric of time and space towards an unknown event horizon from which they may never return. Clockwise “Drag” positions will gather the delay lines close together for a more reverb-like effect. Turn the “Drag” counter-clockwise, and the delay lines will begin to pull apart for a scattered ping-pong delay effect.
The “Reflect” spell alters the depth of the cave, and with it the regeneration of the reverb. This acts as a feedback control and will self-oscillate if cast by a high-level user. Turn clockwise for more wash and echoes, counter-clockwise for less.
Finally, the “Mix” spell alters the alchemical balance between the input signal and the effect. The Afterneath does not go fully wet, but does lower the level
of the input signal as you raise this control to create the appearance of a fully wet reverb.
The Afterneath is true-bypass, and built one-at-a-time by a wizard, two bards, a paladin, a monk, a handful of rangers, a couple druids, a barbarian, a rogue, and a Dungeon Master in the Gelatinous Cube of Akron, Ohio, USA.
The Afterneath uses silent relay-based soft touch switching. Audio will not pass without power.
3 In Stock
Order now for delivery to you on Monday, 24 September 2018
Applies to most UK postcodes. Please allow 2-3 days for delivery to Northern Ireland, Scottish Highlands, UK Islands & Mainland Europe
2 in stock at our Guildford store
1 in stock at our Guildford warehouse
Stock levels last updated at
Free UK Delivery