The Boss Katana KTN-100 is a bedroom practice amp on steroids! It has enough power to be gigged with because of its power scaling function (from 100w to 50w to 0.5w) with loads of cool effects, programmable presets and a few different amp styles.
The amp has got 5 different amp styles that you can choose from:
- Clean - Crystal clean sounds
- Crunch - A touch of overdrive with mild breakup
- Lead - Higher gain for stinging blues solos or fast shred!
- Brown - Super high-gain sound taken from the Japanese Boss Waza amp
- Acoustic - Amazing acoustic setting so that you can use the amp with your electro-acoustic guitar
So once you have chosen your amp sound and set your EQ (Bass, Middle, Treble) you can choose the effects you want to run. The amp has got effects on board but you also have access to 55 other effects through the BOSS tone studio app. You can connect your amp to your computer via USB and then upload the specific effect you want on the amp and save it as a preset. A maximum of 3 effects can run simultaneously but you can choose what those effects will be. If you want simple drive, chorus and reverb you can do so. But if you want to be more experimental by combining ring mod with a slicer then you can set that up with the Tone Studio.
It has 4 memory slots for you to save you favourite sounds and quickly recall them. For example, you could load up a mild rhythm overdrive on tone slot 1 and a screaming lead with loads of delay on tone slot 2 etc. This amp has 2 more slots than its little brother the Katana KTN50.
If you want to use a foot controller to switch between your favourite sounds, the Boss GA-FC can act as a channel switcher and the amp takes your pedals really well too.
The power scaling is an idea borrowed from the Katanas Blues Cube brother where you choose if you want the amp to run at 100w for full volume and power or down to 0.5w for late night bedroom use. It makes the amp really useful if you want 1 unit that can do band practices, as well use it at home without waking the neighbours. And because it has a 12" speaker, you can play with a band without losing too much low end or worrying about your guitar sounding too thin in the mix.
If you decide that scaling the power down isn't quite enough, you can also plug in a pair of headphones for practice.
Boss Katana Version 3 Firmware Update Announced!
One of the great things about the Boss Katana amps is that compatible Katana amps can be updated by simply connecting the amp to your computer to unlock a whole host of new features!
Version 3 sees the Katana range get 3 new effect types that work brilliantly with any of the Katanas five amp characters but with extra ‘tonal magic’ when used with the Brown channels harmonically rich voicing.
- Roland DC-30 Analogue Chorus-Echo
- Boss GE-10 Graphic Equalizer for more tonal shaping than possible before
- Expressive 95E Pedal wah effects
You can now record with stereo effects which means your delays can ping pong from left to right and modulations and reverbs will feel that much wider and more authentic.
The v3 update allows you to assign your favourite parameters to the front-panel effects knobs giving you huge control over your effects on the fly! And you can control specific effects parameters using up to 3 expression pedals via the rear panel and optional GA-FC foot controller!
Version 2 Software
This amp now has the Katana Version 2 software installed!
The free Version 2 update adds many user-requested features to the Katana amps, including new effects types, doubled onboard effects capacity, twice the number of Tone Setting memories, enhanced direct output options, and more.
All Katana amps include integrated access to a wide selection of BOSS effects, which are customizable using the free BOSS Tone Studio editor software. Version 2 adds SDE-3000 delay, Phaser 90E, and Flanger 117E effect types, bringing the total number of available effects to 58. The three new selections are based on effects used to create some of rock’s most famous guitar sounds and are a perfect match for the Katana’s high-gain Brown channel tones.
One of the Katana’s most powerful features is the ability to store favorite amp channel and effects setups in Tone Setting memories for instant recall. The Version 2 update adds a second bank of Tone Settings, doubling the number of available memories. Combined with the newly added channel and global parametric EQs, this elevates the Katana’s performance versatility to even higher levels. Users can switch between the two banks from a panel button or an optional external footswitch.
Version 2 also enhances the Katana’s Reverb section, allowing it to be used for delay or delay-plus-reverb in addition to reverb alone. And on Katana amp models that include an effects loop, the send/return capabilities have been expanded for greater flexibility when inserting external processing in the signal path. All of these features are easily configurable using the BOSS Tone Studio software.
A standout characteristic of every Katana amp is the dynamic interaction between its output section and the speaker, which provides a highly responsive tone and feel that players love. With the new Cabinet Resonance function derived from the flagship Waza amps, users can now shape this interaction with three selectable resonance types. Katana amps also offer line and USB outputs with speaker cabinet simulation, and Version 2 enhances this capability with three Air Feel settings inherited from the Waza series.
Rated Power Output
- 100 W
Nominal Input Level
- INPUT: -10 dBu (1 M ohm)
- AUX IN: -10 dBu (20 k ohms)
- RETURN IN: -10 dBu (100 k ohm)
30 cm (12 inches) x 1
- POWER switch
- MASTER knob
- PRESENCE knob
- POWER CONTROL switch (STANDBY, 0.5 W, 50 W, 100 W)
- BASS knob
- MIDDLE knob
- TREBLE knob
- BOOSTER/MOD button
- DELAY/FX button
- REVERB button
- TAP button
- BOOSTER/MOD knob
- DELAY/FX knob
- REVERB knob
- CH1 button
- CH2 button
- CH3 button
- CH4 button
- PANEL button
- INPUT jack: 1/4-inch phone type
- AUX IN jack: Stereo miniature phone type
- REC OUT/PHONES jack: Stereo 1/4-inch phone type
- SEND jack: 1/4-inch phone type
- RETURN jack: 1/4-inch phone type
- LINE OUT jack: 1/4-inch phone type
- EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
- GA-FC jack: 1/4-inch TRS phone type
- USB port: USB B type
- AC IN jack
- 77 W
- 530 (W) x 248(D) x 484(H) mm
- 20-7/8 (W) x 9-13/16 (D) x 17-1/2 (H) inches
- 14.8 kg
- 32 lbs 11 oz
- Owner's manual
- Power cord
- GA-FC sticker
Options (sold separately)
- Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
- Expression pedal: Roland EV-5, BOSS FV-500L, BOSS FV-500H
- GA FOOT CONTROLLER (GA-FC)