Walrus Audio Slötva Multi-Texture Reverb Pedal

Walrus Audio's new Slötva pedal takes their acclaimed Slö Multi-Texture Reverb a step further — adding the ability to create and store three presets for extra versatility! The superb Slötva allows you to form lush, modulated and sleepy soundscapes that can take your guitar or synth tones to new sonic heights; coming equipped with three different algorithms perfectly designed for ambient experimentalists.

The toggle switch gives you instant access to the three different reverb modes: Dark (Lower Octave), Rise (Ambient Swell) and Dream (Latching Pad), while secondary functions on the switch change between different wave shapes for the modulation on the reverb trail.

Key Features

• Multi-texture reverb pedal with 3 presets.
• Combine 3 custom reverb algorithms with 3 modulation wave shapes.
• 3 selectable reverb modes: Dark (lower octave), Rise (ambient swell), Dream (latching pad with vibrato).
• 3 selectable modulation wave shapes on the reverb trail: Sine (even pitch up and down), Warp (asymmetric pitch up), Sink (asymmetric pitch down).
• Save your favourite dreamscapes by simultaneously pressing and holding down on the bypass and sustain switches, and scroll through them by pressing and releasing the two footswitches together.
• Use the sustain switch to ramp up the reverb trail to max or "freeze" the reverb (latching pad function, 'Dream' mode).
• Slötva can run in 'trails' or 'no trails' modes. To toggle between them, hold down the bypass switch for 1 second while applying power to the pedal. Unplug power and repeat to toggle to the other mode.

Reverb Algorithms

• DARK — Add a lower octave to your reverb trail. Here you'll create deep and wide atmospheric sounds and channel nightmarish soundscapes. X knob sets the level of a -1 octave signal that feeds the reverb.
• RISE — This is an auto-swell reverb for beautiful cinematic swells. Don't rush it. Let it breathe and gently wake up. X knob sets the amount of time it takes the reverb to swell in after a note is played. Set lower for shorter rise times and higher for longer rise times.
• DREAM — Here is a lush reverb with a latching pad function. Press the sustain switch to latch signal. Experiment with the X knob to add vibrato over the pad. Press sustain again and pad will decrescendo according to where decay knob is set. X knob sets the depth of vibrato applied to the reverb trail.

Modulation Wave Shapes

• SINE — Smooth and even pitch up and down modulation.
• WARP — Asymmetric pitch up modulation similar to a warped record.
• SINK — Asymmetric pitch down modulation for sinking detune similar to a Bigsby tremolo.

Specifications

• Power: 9V DC
• Current Draw: 100 mA
• True Bypass: Yes
• Made in the USA