Tech 21 SansAmp Bass Fly-Rig SansAmp - Comp, OCTAFILTER, Chorus,

Not content to bring guitar players a stunning new pedal... Tech21 decided to give Bass players a piece of the action.

This pedal includes a genuine SansAmp, an Octafilter, a chorus, a powerful boost, a Tuner and a compressor. All of this in a streamlined, rugged metal housing that will easily fit in your guitar case. There are illuminated mini-controls to show active status, an included power supply and studio-grade, metal footswitches and jacks. It's everything you need and nothing you don't.

Sansamp

At the center of the pedal is the SansAmp, with Tech21's unique Character control that sweeps through the most storied vintage and modern tones. Three-band active EQ provides professional grade tweakability for any situation. For dirt and grind, Drive adds gain and overdrive. You can also add distortion by engaging the Pre-Boost.

Octafilter

The OCTAFILTER brings an entire re-invented pallette of expression with a crazy amount of possibilities, from Minimoog®-style synth to funky town. The controls interact so that you can get dynamically-filtered clean, fuzz, and octave, as well as octave and fuzz together. When Q is at minimum, Range becomes a high-cut tone filter for different versions of clean, fuzz, octave, and octave and fuzz together. You can then blend any of these combinations with your direct signal via the Mix control. But wait, there’s more.

Compressor

COMP, for compression, utilizes old school, all-analog, FET-based technology, which is inherently warmer, more transparent and musical.

Boost

Switchable Pre/Post Boost. Pre-Boost mode interacts with the SansAmp section to beef up drive and distortion. Post-Boost mode increases the overall volume to punch up fills and solos.

Chorus

Derived from Tech21's Bass Boost Chorus pedal, this adds the choral voicings of two instruments. With a slight delay between, it that adds thickness and space.

Here's what Tech21 have to say about this pedal
 

For the bulk of his 2014 tour with the Winery Dogs, Richie used the final prototype while we were busy getting everything lined up for production. Richie also used the prototype for his 2014-2015 solo tour.

Specifications

• Headphone button switches the 1/4” output into headphone mode
• 1/4-inch 4.7megOhm input to deliver the full sound of piezos
• Input Pad for active basses
• XLR output with ground connect
• 1/4-inch low impedance output
• Rugged, all-metal housing
• Metal footswitches and jacks
• Silent-switching, custom footswitch actuators
• Utilizes included 9V, 200mA DC power supply.