sE Electronics SE7 Condenser Microphones Matched Pair

With an optimised acoustic design, discrete class-A circuitry and a transformerless output, this SE7 pair delivers clear, natural sound quality at all frequencies - without suffering from fizzy highs or a lack of low-frequency punch. The discrete electronics and the switchable attenuation pad ensure a high dynamic range, with high sound pressure level (SPL) handling capability and extremely low-noise components. The switchable low-cut filter helps eliminate rumble or footfall noise, and can also compensate for an excess of bass frequencies caused by the proximity effect. This enables the sE7 to close-mic many instruments including electric guitar speaker cabinets, brass instruments and drums. Reliable operation (even in demanding on-stage applications within difficult environments) is ensured by the roadworthy all-metal design, robust construction, and high-quality manufacturing standards.

High-Quality Condenser Capsule

The sE7’s specialized capsule is designed for natural, balanced sound quality, with an ultra-thin diaphragm for excellent transient response. Its cardioid polar pattern also makes it ideal for most studio or stage applications, delivering great sound for almost any source.

The Quietest Pencil Mic in its Class

With a very short signal path and state of the art electronics, the sE7 is the quietest microphone in its class. The transformerless design ensures pristine sound quality, reproducing instruments with excellent clarity and depth.

Switchable Pre-Attenuation Pad

The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources, like brass instruments and snare drums.

Switchable Low-Cut Filter

The integrated 80Hz low-cut filter helps to eliminate low-frequency rumble or footfall noise, or to compensate for excessive bass (proximity effect) with close-mic techniques.

Specifications

• Capsule Type: 1/2" back-electret condenser capsule
• Polar Pattern: Cardioid
• Frequency Range: 20 Hz - 20 kHz
• Sensitivity: 19 mV/Pa (-34.5 dBV)
• Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)
• Equivalent Noise Level: 16 dB(A)
• Dynamic Range: 120 / 140 dB (0/20 dB Attenuation pad)
• Signal to Noise Ratio: 78 dB
• Low-Cut Filter: 80 Hz, 6 dB/Oct, switchable
• Attenuation Pad: 20 dB, switchable
• Powering: 48 Volts according to IEC 61938
• Electrical Impedance: <200 Ohms
• Recommended Load Impedance: >1k Ohms
• Current Consumption: 3.0 mA
• Connectivity: 3-pin male XLR connector
• Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)
• Weight (Per Microphone): 128 g