The D1 Wireless systems show that Sennheiser is leading the charge in Live Sound technology. Utilising a revolutionary digital architecture, the D1 systems sound just as good as if you had a full cabled connection. That's CD quality sound travelling through the air waves and arriving to your speakers unblemished, even under the toughest ambient conditions. What's more, the systems have been designed to be simple to use, showing that you don't have to be a tech wizard to use the best quality systems. You can just get Hooked up and you're ready to go!
Simple Design
One of the most daunting aspects to the use of a wireless system is getting everything connected together and working properly when there's so many other things to think about in rehearsal. With the D1 systems it has never been easier. Pairing your devices is at the touch of a button. The system locates the best frequencies and up to 15 additional transmission links to ensure you get the best connection. And you only have to wait a fraction of a second. This means you can move on quickly and get on with more important tasks. If you do want to have more control, the D1 systems can also be controlled over a dedicated iOS or Android app, so you can easily make adjustments on the go using your mobile phone or tablet!
Reliable performance
Once connected, with some systems there is always a niggling worry that it will suddenly drop out mid performance, causing absolute pandemonium. The D1 system looks after you right through your performance, checking your radio channels 133 times per second and can even boost transmission power when a stronger signal is needed; all within a blink of an eye!
In the box
- EM-D1 rackmount receiver
- SKM-D1 Handheld transmitter
- e835 Cardioid Capsule
- MZQ Microphone Clamp
- NT-12 power supply
- Transport Case
- User Manual
Cardiod Handheld Vocal Set
The D1 Cardiod handheld Vocal set pairs the power of the D1 transmitter & Reciever with the e835 Dynamic handheld microphone for live use on stage. This classic microphone utilises a cardioid capsule that rejects soundsources other than your vocals. There's also a mute switch so that you have the control to turn off the mic from where you are when needed.
Features
- Cardioid mic from the renowned Evolution Series
- Up to 15 compatible channels (under optimal conditions) in license-free 2.4 GHz band
- Automatic frequency management
- Prevents interference: Intelligent channel back-up allows co-existence with Wi-Fi & Bluetooth
- Audio effects: equalizer, de-esser, automatic gain control
- iOS & Android app for remote control and monitoring of the system
- Sturdy metal housing
Specifications
System
- RF frequency range 2,400 to 2,483.5 MHz
- Dynamic range > 135 dB (A)
- THD, total harmonic distortion typ. < 0,1 % (1 kHz)
- Audio sampling 24 bit/48 kHz
- Signal-to-noise ratio 105 dB (A)
- Modulation GFSK with back channel
- Transmission method TDMA, time diversity, frequency diversity, fast switching antenna diversity
- Latency 3.9 ms
- multi-frequency targets
- Audio codec APT-X Live
- Operating temperature – 10 °C to +55 °C
- Storage temperature – 20 °C to +70 °C (The temperature range is influenced by the battery characteristics)
EM D1
- RF sensitivity <-90 dBm
- RF output power back channel 10 mW/100 mW (country-specific)
- Audio output Mic/line level switch –24 dB/0 dB, XLR, balanced max +18 dBu, Jack, unbalanced/balanced max +12 dBu/max +18 dBu
- Low-cut filter –3 dB at 120 Hz
- Equalizer 7-band graphic equalizer
- Automatic gain control (AGC) compression/expansion with automatic make-up gain function
- Display OLED
- Connection XLR/¼" (6.3 mm) jack
- Antenna connector 2 x Rev-SMA
- Network socket RJ45
- Network protocol Media Control Protocol, TCP/IP IPv4 (DHCP, Manual)/IPv6
- Power supply 12 V DC hollow jack
- Current consumption 350 mA
- Weight approx. 824 g
SK D1
- RF output power adaptive, up to 100 mW (country-specific)
- Connection 3.5 mm jack socket, lockable
- Weight approx. 85 g
- Microphone Frequency response: 50 to 20,000 Hz
- Max. input level: 2.2 V RMS
- Line Frequency response: 20 to 20,000 Hz
- Max. input level: 3.3 V RMS
- Input impedance 1 M
- Input sensitivity automatic sensitivity adjustment
- Battery Specification 2 x AA size battery (1,5V), operating time: typ. 6 h
- Accupack Battery Specification, operating time: typ. 11 h (optional accessory)
