Empress Compressor Pedal
The Empress Compressor is a high quality compressor pedal with an all-anologue signal path and an easy-to-use ratio toggle switch. It's also got a mix knob to dial in the compression over your clean tone which is always an advantage to allow you to keep the dynamic of your playing.
The gain meter will allow you to monitor the amount of compression at all times.
Here's what Empress say about the Compressor
Compression is a tool used on pretty much every recording you will ever hear, yet this extremely useful and versatile tool is often overlooked by guitar players as part of their rig.
Other compressor pedals are often limited by oversimplified controls and heavily colored sounds. We have created a truly transparent compressor, complete with all the controls found in the studio. The result is a tool that allows for a wide range of sounds from subtly adding sustain to getting the “quack” that country players love.
We've also included a mix knob to blend in the dry signal for an even more transparent sound and a gain reduction meter so you know what the compressor is doing at all times.
- All Analog Signal Path - no digitals in here!
- Extremely Transparent - Add dynamic control without altering the original tone of your instrument
- 3 Compression Ratios - 2:1, 4:1 and 10:1 ratios offer lots of flexibility
- Attack and Release Control - allows for ultimate control over the compression characteristics
- Mix - Blend uncompressed signal in with the compressed signal for parallel compression, New York Style!
- Metering - Meter either gain reduction, input, or both.
- True Display LEDs - Bright multi-color LEDs always let you know what the Compressor is doing.
- Bass - Works great on bass!
- True Bypass - The Empress Compressor employs true bypass, so you can be sure that it's not affecting the signal when disengaged.
- Small Size - The enclosure measures approximately 4.5" by 3.5" by 1.5", which is delightfully small when considering all the features packed into this unit.
- Beautiful Case - It has a sparkle you can't deny!
- Input Impedance: 1M
- Output Impedance: 2.2k
- Frequency Response (-3dB): 40Hz - 35kHz
- Distortion: less than 0.1%
- Noise: -101dB
- Power Input Voltage: 9 - 18 V DC (Negative tip)
- Power Input Connector: 2.1mm barrel connector (Negative tip)
- Power Consumption: ~ 100mA
- Enclosure Material: Die Cast Aluminum
- Input connector: 1/4" Jack
- Output connector: 1/4" Jack
- Height (Enclosure only): 1.5"
- Height (including controls): 2"
- Length: 3.5"
- Width: 4.5"
- Weight: 1lbs
2 In Stock
Order now for delivery to you on Monday, 26 March 2018
Applies to most UK postcodes. Please allow 2-3 days for delivery to Northern Ireland, Scottish Highlands, UK Islands & Mainland Europe
2 in stock at our Guildford store
Stock levels last updated at
Free UK Delivery