Replacing your drum heads is a great way to restore the sound of drums that have lost their punch and give new power to your kit. Improving your drums' sound can make a huge difference to your play. Whether your kit is fresh out of the box or practically antique a new set of heads that are designed for your style can really increase the quality of your tone.
Here's what Evans have to say about this head
Evans clear G2 series, one of the most popular drum heads on the market, features two plies of 7mil film that provide a high level of consistency and durability. Evans Level 360 technology is incorporated to extend the level playing surface of the drumhead, 360 degrees around the drum. The vertically enhanced collar design guarantees even contact with the critical bearing edge of the drum shell, resulting in: ease of tuning, extended pitch range and optimum quality of sound. Evans Level 360 collar resolves the age-old dilemma of traditional synthetic heads consistently not fitting the drum shell without using considerable force.
Specifications
- Type: Tom
- Diameter: 10", 12", and 14" heads
- Finish: Clear
- Skin type: 2 ply 7 Mil Mylar
- Ported: No
- Dotted: No
Basic Guide to heads
There are 2 kinds of head on each drum. The side that you hit is the batter head while the bottom skin is a resonant head.They come in single- or two-ply (1 or 2 layers of material) construction in a variety of materials and finishes.
You get an increased resonance and sustain with one-ply heads, while heavy hitting music can sound better on the heavier double-ply heads.
Skin Thickness
The drum head's thickness is another thing to consider. Thinner, single layer heads have a sensitive response, with bright, resonant sound and complex overtones.
Thicker single-ply heads are more durable and have a higher tuning range with less sustain and more attack than thinner heads.
Two-ply heads have less attack and a quicker decay for a focused tone. They can take a serious pounding so if you're slamming away with a double pedal this might be your best choice.
Dotted heads
Some batter heads have a dot affixed to the top or bottom of the head to muffle excess ring. This gives you a more focused, drier sound. Some players still put a line of duct tape on to achieve this same effect but the results are unpredictable and it really spoils the look of the kit.
Note: If you use brushes you're going to want to stick with heads using dots on the head's underside to avoid snagging a bristle.
Coated heads
Drum heads with a white or black coating give a subtle muffling effect. Some have internal sound rings embedded around their outer perimeter to control excess ring.
Many jazz drummers put clear heads on the toms and a classic white-coated head on the snare drum, as the texture of a coated snare head sounds better with brushes. The bottom head on the snare drum is known as the snare-side head, a transparent, extra-thin head that maximizes response to the snare wires.
Bass Drum heads
Bass drum heads can include an internal dampening system on the batter head to provide a controlled sound and a port hole for improved tone and to make it easy to fit a mic. Port hole protector rings are also available to prevent your drum head from ripping or denting when fitting a mic.