The V PACK ARENA is the ultimate drum microphone kit. It bundles together one V KICK, one V7 X, two sE8 condensers and three V BEATs (with V CLAMPS). This is everything you’ll need to effectively mic up your drum kit and record it to a high standard. Each microphone is rugged enough to withstand powerful tones and will capture the individual sections your drum kit equally well.
The microphones come in a sturdy flight case – made from a durable plastic, with an inner foam lining. The outer plastic is effective at protecting against shock and impact, while the foam is cut in a way which aims to minimise the movement of your gear during travel. Every drummer and recording engineer should have this useful, all in one package in their locker.
Specifications
Included in the Kit:
- x1 V KICK
- x3 V BEATs
- x3 V CLAMPS
- x1 V7 X
- x2 sE8
- x1 V CASE
V KICK
- Capsule: Dynamic
- Voice Coil: Aluminium
- Magnet: Neodymium
- Directional Pattern: Supercardioid
- Frequency Range: 20 Hz - 19 kHz
- Impedance: 300 Ohms
- Sensitivity: 0.2 / 0.4 mV/Pa (-69 / -75 dBV)
- Connectivity: 3-pin male XLR
- Height: 60 mm (2.4 in.) x Length: 135 mm (5.3 in.)
- Weight: 468 g
V BEATs
- Capsule: Dynamic
- Voice Coil: Aluminium
- Magnet: Neodymium
- Directional Pattern: Supercardioid
- Frequency Range: 30 Hz - 19 kHz
- Impedance: 300 Ohms
- Sensitivity: 2.0 mV/Pa (-54 dBV)
- Connectivity: 3-pin male XLR
- Height: 61 mm (2.4 in.) x Length: 110 mm (4.3 in.)
- Weight: 347 g
V7X
- Capsule: Dynamic
- Voice Coil: Aluminium
- Magnet: Neodymium
- Directional Pattern: Supercardioid
- Frequency Range: 30 Hz - 19 kHz
- Impedance: 300 Ohms
- Sensitivity: 2.0 mV/Pa (-54 dB)
- Connectivity: 3-pin male XLR
- Diameter: 47 mm (1.86 in.) x Length: 176 mm (6.93 in.)
- Weight: 269 g
sE8
- Capsule Type: Hand-Crafted Small-Diaphragm True Condenser
- Polar Pattern: Cardioid
- Frequency Range: 20 Hz - 20 kHz
- Sensitivity: 25 mV/Pa (-32 dBV)
- Max SPL: 139 / 149 / 159 dBSPL (0/10/20 dB pad) (0.5% THD @ 1kHz)
- Equivalent Noise Level: 13 dB(A)
- Dynamic Range: 126 / 136 / 146 dB (0/10/20 dB Attenuation pad)
- Signal to Noise Ratio: 81 dB
- Low-Cut Filter: 80 / 160 Hz, 6 dB/Oct, switchable
- Attenuation Pad: 10 / 20dB, switchable
- Powering: 48 Volts according to IEC 61938
- Electrical Impedance: 110 Ohms
- Recommended Load Impedance: >1k Ohms
- Current Consumption: 2.7 mA
- Connectivity: 3-pin male XLR connector
- Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)
- Weight: 141 g
