This cabinet is an Andertons exclusive, made by Cornford for Andertons to go with the Cornford Roadhouse heads. The spec of the cabinet itself is exactly the same as other Cornford cabs - high quality 19mm pine with metal hardware. As proponents of great attention to detail when it comes to building amplifiers, it should come as no surprise that Cornford do not cut corners when it comes to their cabinets. Their spectacular amps are never let down!
The Roadhouse cabinets are loaded with specially-selected Celestion Seventy80 Speakers. Check out the spec below. The Andertons Exclusive Cornford Roadhouse 2x12 cab comes covered in black vinyl.
Don't forget the lead! Make sure you add a speaker lead to your basket when you buy this cab. We've shown an appropriate one in the related items box.
Cabinet Specification
- Nickel hardware (corners, screws, cup washers, handle fixings, etc.)
- Recessed handles.
- High quality, 19mm solid pine lock jointed with ply baffle board permanently dadoed into the cabinet.
- Recessed spec plate and input on rear.
- Four rubber feet.
- 8 ohm, 160w, single input
Celestion Seventy80 12" Speaker Specification
One of our best sellers, this speaker meets the expanded frequency range often requested by the new generation of amp manufacturers.
The Seventy 80 is detailed and crisply defined, with a tightly controlled lowend and punchy, aggressive upper midrange. The top-end response is also subtly increased. Used singly, in pairs or quartets - it is capable of reproducing a wide range of sounds and styles whilst adding the undeniable Celestion character to any amp.
Technical Specifications
- Nominal diameter: 12", 305mm
- Power Rating: 80W
- Nominal impedance: 8ohms and 16ohms
- Sensitivity: 98dB
- Chassis type: Pressed steel
- Voice coil diameter: 1.75", 44.5mm
- Voice coil material: Round copper
- Magnet type: Ceramic
- Magnet weight: 31oz, 0.88kg
- Frequency range: 85-5000Hz
- Resonance frequency, Fs: 103Hz
- DC resistance, Re: 5.4ohms & 10.41ohms
- Unit weight: 6.8lb, 3.1kg
