Channel 38 will allow FOUR Shure PG systems to operate simultaneously.
One of Shure's most affordable wireless systems, this discreet lapel mic and beltpack transmitter is ideal for presenters and any other person wishing to be amplified wire free and hands free.
Included in this pack
- 1x PG185TQG Lavalier Microphone
- 1x PG14 Wireless Transmitter
- 1x PG4 Wireless Diversity Receiver
Here's what Shure say about the PG14UK/PG185 Lavalier System
The Shure Performance Gear PG185 wireless system is the perfect introduction to our wireless portfolio. This package comprises a PG1 bodypack transmitter, a PG185 Lavalier mic and a PG4 diversity receiver.
FAST AND EASY SETUP, EVEN FOR A BEGINNER?
Simply press the channel button on the front of receiver and choose one of 10 available channels. A seven-segment LED indicates instantly if the selected channel is available. Once this is done, choose the same on the transmitter, and you are ready to go.
HOW MANY MUSICIANS CAN USE THIS SYSTEM SIMULTANEOUSLY?
A maximum of four musicians can use Performance Gear Wireless systems in parallel. One wireless system consists of one bodypack transmitter and one receiver.
WHY INTERNAL ANTENNAS?
For ideal signal strength, antennas on a wireless system need to be setup in a certain way. The internal antennas on Performance Gear Wireless systems are already set in this ideal way, offering up to 75 m operating range and optimal signal strength.
Additionally internal antennas cannot be broken during setup, use or transport.
SYSTEM TECHNICAL SPECIFICATIONS
- Compatible systems per frequency band (up to): 4
- Selectable frequencies: 10
- Auto Setup Features: No
- Audio Reference Companding: No
- Included Antennas: Internal 1/4-wave
- Antenna Options: No
- Receiver Network Ability: No
- PC Control: No
- Rack Hardware: Optional (URT)
- Case: Optional System Case
- Transmitter Display: Multi-color LED
- Receiver Display: Multi-color LED
- Battery, Endurance: 9V, >8 h
- Environment: Small to medium stages
PG4 Receiver Specs
- Output Impedance XLR connector: 200 ohms 1/4 inch connector: 1k ohms
- Audio Output Level Ref.
- +/- 33 kHz deviation with
- 1 kHz tone
- XLR connector (into 100K ohms load): -19 dBV, typical
- 1/4 inch connector (into 100K ohms load): -5 dBV, typical
- Sensitivity -105 dBm for 12 dB SINAD, typical
- Image Rejection >50 dB, typical
- Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.)
- Dimensions - PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.)
- Weight 241 grams (8.5 oz)
- Weight - PG88 429 grams (15.1 oz)
- Housing Molded ABS
- Power Requirements 12-18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply
PG1 Bodypack Transmitter Specs
- Audio Input Level
- -10 dBV maximum at "mic" gain position
- +10 dBV maximum at 0dB gain position
- +20 dBV maximum at -10dB gain position
- Gain Adjustment Range 30 dB
- Input Impedance 1m ohms
- RF Transmitter Output 10 mW typical (dependent on applicable country regulations)
- Dimensions 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.)
- Weight 75 grams (2.6 oz.) without battery
- Housing Molded ABS
- Power Requirements One 9V alkaline or rechargeable battery
- Battery Life Up to 8 hours (alkaline)
This bandwidth requires a license from JFMG costing just £75 per year.
Please call for further details.
