Channel 38 will allow FOUR single Shure PG systems to operate simultaneously or two dual systems!
This dual microphone Performance Gear wireless package is a great way to insure high-quality Shure performance without spending a lot of money. Included is everything you need to run one handheld mic and one lavalier (tie-clip) mic wirelessly for events and gigs.
In this package
- 1x PG58 Handheld mic with PG2 Handheld Transmitter
- 1x PG185 Lavalier mic
- 1x PG1 Bodypack Transmitter
- 1x PG88 Wireless Dual Receiver
Here's what Shure say about the PG185/PG58 dual wireless system
The Shure Performance Gear PG185/PG58 dual wireless system is the perfect introduction to our wireless portfolio. This package comprises a PG1Bodypack transmitter, a PG185 lavalier mic, a PG2 handheld transmitter and a PG88 diversity receiver.
FAST AND EASY SETUP, EVEN FOR A BEGINNER
Simply press the channel button on the front of receiver and choose one of 10 available channels. A seven-segment LED indicates instantly if the selected channel is available. Once this is done, choose the same on the transmitter, and you are ready to go.
HOW MANY MUSICIANS CAN USE THIS SYSTEM SIMULTANEOUSLY?
Up to four musicians can use Performance Gear Wireless systems at the same time. One wireless system consists of one transmitter and one receiver, so at a maximum you can run two dual receiver systems simultaneously.
WHY INTERNAL ANTENNAS?
For ideal signal strength, antennas on a wireless system need to be setup in a certain way. The internal antennas on Performance Gear Wireless systems are already set in this ideal way, offering up to 75 m operating range and optimal signal strength. Additionally internal antennas cannot be broken during setup, use or transport.
PG58 with PG2 Handheld Transmitter
- Dynamic cardioid microphone
- Tuned to accentuate the clarity of lead and backup vocals
- Interchangeable microphone head
- Compatible with all Shure wireless transmitters
PG185 Lavalier Mic
- Cardioid Condenser lapel mic
- Clothing clip for secure placement
- Acoustic windscreen minimizes wind noise in outdoor applications
- Includes 4-pin mini connector which is compatible with all of our bodypack transmitters
PG1 Bodypack and PG2 Handheld Transmitters
- UHF transmitter
- Compatible with all Shure microphone heads
- Includes a single power/mute switch
- LED indicator showing power, mute and battery status
- 8 hours of continuous use using a 9v battery (included)
- Operating range of 75m
PG88 Wireless Dual Receiver
- Compact and robust dual UHF receiver
- Easy to use, also with no precognition about wireless technology necessary
- Microprocessor controlled diversity
- Internal antennas simplify operation and storage
- Choosing a free frequency with a touch of button
System Technical Specifications
- Compatible systems per frequency band (up to): 4
- Selectable frequencies: 10
- Auto Setup Features: No
- Audio Reference Companding: No
- Included Antennas: Internal 1/4-wave
- Antenna Options: No
- Receiver Network Ability: No
- PC Control: No
- Rack Hardware: Optional (URT)
- Case: Optional System Case
- Transmitter Display: Multi-color LED
- Receiver Display: Multi-color LED
- Battery, Endurance: 9V, >8 h
- Environment: Small to medium stages
PG88 Dual Receiver Specifications
- Output Impedance XLR connector: 200 ohms 1/4 inch connector: 1k ohms
- Audio Output Level Ref.
- +/- 33 kHz deviation with
- 1 kHz tone
- XLR connector (into 100K ohms load): -19 dBV, typical
- 1/4 inch connector (into 100K ohms load): -5 dBV, typical
- Sensitivity -105 dBm for 12 dB SINAD, typical
- Image Rejection >50 dB, typical
- Dimensions 188 mm L x 103 mm W x 40 mm D (7.4 in. x 4.0 in. x 1.5 in.)
- Dimensions - PG88 388 mm L x 116 mm W x 40 mm D (15.3 in. x 4 in. x 1.5 in.)
- Weight 241 grams (8.5 oz)
- Weight - PG88 429 grams (15.1 oz)
- Housing Molded ABS
- Power Requirements 12-18 Vdc at 160 mA (PG4), 320mA (PG88), supplied by external power supply
PG1 Bodypack Transmitter Specifications
- Audio Input Level
- -10 dBV maximum at "mic" gain position
- +10 dBV maximum at 0dB gain position
- +20 dBV maximum at -10dB gain position
- Gain Adjustment Range 30 dB
- Input Impedance 1m ohms
- RF Transmitter Output 10 mW typical (dependent on applicable country regulations)
- Dimensions 110 mm H x 64 mm W x 21 mm D (4.3 x 2.5 x 0.8 in.)
- Weight 75 grams (2.6 oz.) without battery
- Housing Molded ABS
- Power Requirements One 9V alkaline or rechargeable battery
- Battery Life Up to 8 hours (alkaline)
PG2 Handheld Transmitter Specifications
- Audio Input Level
- +2 dBV maximum at -10dB position
- -8 dBV maximum at 0dB position
- Gain Adjustment Range 10dB
- RF Transmitter Output 10 mW typical (dependent on applicable country regulations)
- Dimensions 223.52 mm L x 53.34 mm Dia. (8.8 in. x 2.10 in.)
- Weight 218 grams (7.7 oz.) without battery
- Housing Molded ABS handle and battery cup
- Power Requirements One 9V alkaline or rechargeable battery
- Battery Life Up to 8 hours (alkaline)
This bandwidth requires a license from JFMG costing just £75 per year.
Please call for further details.
