Channel 38 will allow SIX Shure PGX systems to operate simultaneously.
The ubiquitous live vocalist wireless system, Shure have taken the most popular live vocal mic in the world and added it to a high-quality, robust wireless system that is easy to use and effective over a large range.
Included in this package
- 1x Shure SM58 with PGX Handheld Transmitter
- 1x PGX4 Diversity Wireless Receiver
Here's what Shure say about the PGX SM58 System
The Shure PGX SM58 system offers superior wireless technology, automatic set-up features and the legendary SM58 microphone. The system comprises of a PGX2/SM58 Handheld transmitter and a PGX4 Diversity receiver. It is ideally suited for vocals and can be used by bands and presenters.
SM58 WITH PGX2 HANDHELD TRANSMITTER
- Dynamic cardioid microphone
- Tuned to accentuate the clarity of lead and backup vocals
- Interchangeable microphone head
- Compatible with all Shure wireless transmitters
- UHF Handheld transmitter
- Compatible with all Shure microphone heads
- Includes a single power/mute switch
- LED indicator showing power, mute and battery status
- 8 hours of continuous use using 2 AA batteries (included)
- Operating range of 92m
PGX4 WIRELESS DIVERSITY RECEIVER
- Compact and robust UHF receiver
- Easy to use, no prior wireless experience necessary
- Automatic frequency selection with a touch of a button.
- Audio Reference Companding for exceptional audio performance
- Microprocessor controlled diversity
- 1/4 wave antennas
FAST AND EASY SETUP, EVEN FOR A BEGINNER
Simply press the channel button on the front of the receiver and it will perform a quick scan of the area and select a clear frequency to avoid any unwanted interference. Once this is done, sync up the receiver with your transmitter by pressing the sync button on the receiver and pointing the infrared port on the transmitter at the receiver.
HOW MANY MUSICIANS CAN USE THIS SYSTEM SIMULTANEOUSLY?
A maximum of 8 musicians can use PGX Wireless systems in parallel. One wireless system consists of one handheld transmitter and one receiver.
IS THERE A DIFFERENCE IN SOUND QUALITY BETWEEN THIS SYSTEM AND A WIRED SM58?
The design goal of wireless microphone systems is that the user cannot differentiate between a wired or wireless mic. The PGX system uses our patented Audio Reference Companding which makes the system sound more like a wired microphone than ever before, with less noise and greater dynamic range than other wireless systems. No artifacts, lower noise floor and clearer sound at all levels.
Features
- 100 m (300 ft.) operating range
- Multi-color LED indicating power, lockout, mute and low battery
- The frequency Agile UHF design provides up to 90 selectable UHF frequencies that operate on an 18MHz UHF bandwidth
- More than eight hours of continuous use with two AA batteries
- Carrying case included in every system
- Diversity Reception system uses twin receiver circuits to minimise noise and drop out caused by RF interference
- Use up to 9 systems simultaneousy within the 846 - 865 Mhz range
- PGX4 has has XLR and unbalanced 1/4 inch jack audio outputs
- PGX2 includes mute switch and battery power warning lights - 8 hours battery life from 2 x AA 1.5v alkaline batteries
SYSTEM TECHNICAL SPECIFICATIONS
- Compatible systems per frequency band (up to): 8
- Selectable frequencies: 90
- Auto Setup Features: Scan/Sync
- Audio Reference Companding: Yes
- Included Antennas: Attached 1/4-wave
- Antenna Options: No
- Receiver Network Ability: No
- PC Control: No
- Rack Hardware: Optional (URT)
- Case: System Case
- Transmitter Display: Multi-color LED
- Receiver Display: Multi-color LED
- Battery, Endurance: 2AA, >8 h
- Environment: Small to medium stages
PGX2 Handheld Transmitter Audio Input Level
- +2 dBV maximum at -10dB position
- -8 dBV maximum at 0dB position
Gain Adjustment Range
RF Transmitter Output
- 30 mW maximum (dependent on applicable country regulations)
Dimensions including SM58 cartridge
- 254 mm x 51 mm dia. (10 x 2 in.)
Weight
- 290 grams (10.2 oz.) without batteries
Housing
- Molded PC/ABS handle and battery cup
Power Requirements
- 2 "AA" size alkaline or rechargeable batteries
Battery Life
PGX4 Receiver Dimensions
- 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight
Housing
Audio Output Level (ref. +/- 33 kHz deviation with 1 kHz tone)
- XLR connector (into 600 ohms load): -19 dBV
- 1/4 inch connector (into 3000 ohms load): -5 dBV
Output Impedance
- XLR connector: 200 ohms
- 1/4 inch connector: 1k ohms
XLR output
- Impedance balanced
- Pin 1: Ground (cable shield)
- Pin 2: Audio
- Pin 3: No Audio
Sensitivity
- -105 dBm for 12 dB SINAD, typical
Image Rejection
Power Requirements
- 12-18 Vdc at 150 mA, supplied by external power supply
This bandwidth requires a license from JFMG costing just £75 per year.
Please call for further details.