Orange Thunderverb 50w Valve Head

Orange Thunderverb series are here to rock your socks off! Orange produce fine valve amps with one of the most instantly recognizable and unique tones: a British crunchy lush cascading sound with just a hint of beautifully rounded fuzz. Once it's heard it's never forgotten! The Thunderverb 50H is a 50w all valve head with two clean/crunch channels. The Channel A features a three band EQ, volume and gain while Channel B features a shape control (sweeps between a mid scooped tone to a mid boost/hi and low cut) volume and gain.

To add to the basic tone shaping elements the Thunderverb Head features a valve driven FX loop and valve driven reverb (you see where they're going with this?) and possibly one of the coolest features: a footswitchable attenuator giving you a whole host of options for boosts, improved sustain etc.

If you're after out and out apocalyptic self oscillating fuzz you might do better looking at the Rockerverb series of Orange Amps but if you want the mainstay classic orange lush crunch with great tone shaping options to boot, look no further than the Thunderverb!

Here's what Orange say about the Thunderverb 50 Head

The Thunderverb 50 is a Twin Channel Class A/B amplifier. All valve, 50 watt RMS, channel-switching head with foot switchable attenuator, valve FX loop and valve-driven reverb. This amplifier sports two clean/crunch lead channels, each with three stages of gain. Channel A has the same three band EQ as the lead channel used on the Rockerverb series. Channel B has a new shape control that scoops the mids and decreases the bass and treble when turned up. Use this scoop knob to dial in everything from vintage rock to modern blues, hard rock to metal.

The Thunderverb 50 also has a foot switchable attenuator. Dial in your rhythm tone at a lower volume, then active the attenuator to boost the volume for really loud breaks, all without affecting your tone!

Specification

• Channel A: Gain, Bass, Middle, Treble, Volume
• Channel B: Gain, Shape, Volume
• Attenuator Control: Foot switchable for both channels
• Reverb control: Foot switchable for both channels
• Features: Attenuator * Reverb * FX Loop
• Output: 50w RMS
• Valves: Preamp: 4 x ECC83/12AX7, Output: 2 X EL34, Reverb and FX Loop: 2 x ECC81/12AT7
• Speaker Outputs: 1 x 16ohm, 2 x 8ohm
• Dimensions: (W x H x D) 55×25.5x28cm, 21.5x10x11in
• Weight: 25kgs/55lbs