This portable, all-in-one PA system from loudspeaker experts JBL represents convenience and portability without sacrificing sound. With 300 watts of power and 10 inch woofers, the EON210P is more than enough for light sound reinforcement for a small venue such as a hall. If you need a mixing and amplification system for up to 4 microphones, the EON210P is ideal.
Similarly, the JBL EON210P could handle a small musical ensemble such as an acoustic duo or three piece, as well as background music duties for events and parties. The whole system packs away neatly (with the mixer attaching to one of the speakers for easy transportation, with a storage compartment for cables etc. in the other speaker).
Weighing in at less than 15kg for the whole system, the EON210P is a revolution in high-quality portable PA amplification.
Here's what JBL say about the EON 210P Portable PA System
The EON210P consists of two 10-inch, two-way, powered loudspeakers, one with a detachable powered mixer and the other with a detachable storage compartment, one pair of unshielded speaker cables and a power cord. Capable of reproducing full bandwidth sound at high levels the 210P is comprised of a 250 mm (10 in) woofer, a 37.5 mm (1.5 in) neodymium high frequency compression driver coupled to a 100 degrees H by 60 degrees V waveguide driven by a 300 watt Crown Class-D power amplifier and integrated mixer.
Features
- 300 watt High-Performance Powered Speaker System
- Ergonomic soft touch top grip for easy handling
- 10" low-frequency driver with neodymium magnet for low-distortion and light weight
- 1" throat diameter next generation JBL neodymium compression driver
- Efficient Crown Class-D amplifier technology
- 100 degrees H x 60 degrees V asymmetrical wave guide for uniform audience coverage
- 8 chanel powered mixer with intuitive interface
- On board digital multi-effects
- Integrated 36 mm pole mount socket with stabilizing securing screw
- Highly designed composite enclosures for durability, lightweight, and acoustic performance
Applications
- Live sound reinforcement, speech and vocals, music playback in entertainment, A/V, and institutional venues - especially when ease of use and portability are important factors.
- Amplification, mixing, and monitoring for electronic musical instruments.
- Everywhere you need to be heard.
Specifications
- System Power Rating: 300 Watts (2 X 150 Stereo)
- Maximum SPL Output: 124 dB peak system output (pink noise)
- Net Weight of System: 33 lbs. (19 lbs. for unit with powered mixer, 14 lbs. for unit with storage pod)
- System Type: Powered mixer with 2 two-way bass-reflex enclosures
- Frequency Range (-10 dB): 60 Hz - 20 kHz
- Frequency Response (+/-3 dB): 75 Hz - 19 kHz
- AC input: 120 - 240 V 50/60 Hz, voltage selector switch sets operational range
- Amplifier Design: Crown Class D
- Output Connector: 2 X 1/4" TS (unbalanced) amplifier outputs
- Input Connectors: 8 inputs (4 Mono Mic/Line, 2 X Stereo)
- Channels: 1-4 are XLR / 1/4" jack combo connectors, XLR is a mic level input, 1/4" is a line level input. 5-6, one pair of 1/4" balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack
- Input Impedance: Ch 1-4 Combo: XLR 3 K Ohms Balanced
- Ch 1-4 Combo: TRS 20 K Ohms Balanced
- Ch 5-6: TRS 25 K Ohms Balanced
- Ch 5-6: RCA 12 K Ohms Unbalanced
- Ch 7-8: 3.5 mm 30 K Ohms Unbalanced
- Phantom Power: 30 V
- Output Connectors: Monitor outputs: one pair of 1/4" balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
- Headphone output: one 3.5 mm stereo jack
- Main Output LED Ladder: Limit: Red LED indicates limiter active condition
- Signal: Green LED indicates signal present
- Signal Indicators: Ch 1-4: Peak LED: Green = signal present, Red = input overload
- EQ: Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost
- System Limiter: On Board DSP Limiting and Tuning
- LF Driver: 1 x JBL 328 H 250 mm (10 in) woofer
- HF Driver: 1 x JBL 2414H-1 37.5 mm (1.5") annular polymer diaphragm, neodymium compression driver
- Coverage Pattern: 100 deg x 60 deg nominal
- Crossover Frequency: 2 kHz
- Crossover Type: Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters
- Enclosure: Polypropylene
- Suspension/ Mounting: 36 mm pole socket with stabilizing screw
- Handles: One on top
- Grille: Powder coated perforated steel
- Shipping Package (HxWxD): 21.5" x 26" x 13.75" (546 mm x 660 mm x 349 mm)
