Blackstar HT Effects Pedals
Following on from the hugely successful Blackstar HT Tube Drive pedals, Blackstar have just announced the release of 3 new HT Tube Effects pedals.
This range of three digital/valve pedals will consist of a delay, a reverb and a modulation pedal. Each pedal will have eight effects modes and a simple boutique operation.
The valve will be on the input stage of the pedals as was the case with vintage valve effects. The amount of valve warmth and breakup will be variable. The digital effects will be modelled on vintage effects.
HT-Delay "pure valve delay"
HT-Reverb "pure valve reverb"
HT-Modulation "pure valve modulation"
All 3 models will be floor-mounted using the existing HT Range housing. The switching will be completely silent. All models include an ECC83 valve and will come supplied with a 16V AC mains adapter. All pedals have and stereo outputs, a bypass footswitch and either and tap tempo footswitch or a time mode footswitch. A level indicator is included next to the Saturation control to indicate the strength of the effect. This will change in colour from green (no saturation), through yellow and orange to red.
Summary of FX in each pedal
Blackstar Tube Delay Pedal
A digital delay pedal with Mode, Speed, Feedback, Saturation and Level controls. The eight modes are: Linear, Analogue, Multihead 1, Multihead 2, Tape, Space, Loop 1, Loop 2.
Blackstar Tube Reverb Pedal
A digital reverb pedal with Mode, Time, Tone, Dwell and Level controls. The eight modes are: Room, Hall, Bright Hall, Plate, Spring, Arena, Reverse, Gate.
Blackstar Tube Modulation Pedal
A digital modulation pedal with Mode, Speed, Feedback, Saturation and Level controls. The eight modes are: Flange, Phase 1, Phase 2, Vintage Chorus 1, Vintage Chorus 2, Multi-Chorus, Tremolo, Rotary.
HT-Reverb Pedal Specification
Features:
Floor mounted effects pedal
Connectors:
Input
Left (mono) output
Right output
16V AC input
Controls:
Mode (Room, Hall, Bright Hall, Plate, Spring, Arena, Reverse, Gate)
Time
Tone
Dwell
Dwell level indicator LED (green, yellow, orange, red)
Level
Bypass footswitch
Bypass on/off LED indicator
Time mode footswitch
Time mode LED indicator
Dimensions:
W 160mm x H 80mm x D 119mm
Comes with Power Supply
