| SPECIFICATIONS |
K10 |
| Configuration |
Multipurpose 2-way |
Transducers Low-frequency High-frequency |
10" cone transducer 1.75" diaphragm compression driver |
| Frequency Response (-6 dB) |
60 Hz - 18 kHz |
| Frequency Range (-10 dB) |
56 Hz - 20 kHz |
| Nominal Coverage (-6 dB) |
90 conical |
| Maximum SPL (1 meter) |
129 dB peak |
| Amplifiers |
| Power Output |
1000 W Class D |
|
| Input Impedance (ohms) |
XLR / 1/4": 40k balanced / 20k unbalanced XLR / 1/4" MIC mode: 2260 balanced RCA: 10k |
| Controls |
Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP;), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) |
| Indicators |
Power, Signal A, Signal B, Standby, Limit, Mic |
| Connectors |
Balanced female XLR/1/4" line/mic level input, Balanced female XLR/1/4" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector |
| Cooling |
On demand, 50 mm variable speed fan |
| Amplifier Protection |
Thermal limiting, output overcurrent, overtemperature muting, GuardRail; |
| Transducer Protection |
Thermal limiting, excursion limiting |
| AC Power Input |
Universal power supply 85 - 265 VAC, 50 - 60 Hz |
AC Power Consumption (1/8 Power) |
100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A |
| Enclosure |
| Material |
Impact resistant ABS |
| Finish |
Black paint |
| Grille |
Black powder coated 18 gauge steel |
| Dimensions (HWD) |
20.4" x 12.6" x 11.8" 519 mm x 320 mm x 300 mm |
| Weight (Net) |
32 lb / 14.5 kg |
| Available Accessories |
K10 TOTE, K10 YOKE, K SERIES M10 KIT |