BEHRINGER XENYX 1002FX 10-INPUT 2-BUS MIXER WITH XENYX MIC PREAMPS, BRITISH EQ, 24-BIT MULTI-FX PROCESSORThe Behringer Xenyx 1002 FX is a premium 10 input mixing desk with 2 subgroup buses with independent outputs for routing flexibility, an FX effects send control for each channel, British style EQ with the warmth and musicality of earlier studio consoles, Xenyx mic preamps, 24-bit studio quality effects processor with 99 presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects. Assignable CD/tape inputs have been incorporated for routing flexibility. The 99 presets cover reverbs, ambience, delay, modulation, pitch-shift as well as combination effects based on delay plus one other effect.The new Behringer XENYX mic preamp featured on the 1002FX mixers matches the bandwidth from 10 Hz to 200 kHz, 130 dB dynamic range, transparency, and headroom of boutique-style, stand-alone mic preamps.BEHRINGER XENYX 1002FX MIXING DESK FEATURESPremium ultra low-noise, high headroom analog mixer. 2 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps. +48V phantom power on mic preamps.Neo-classic "British" 3-band EQs for warm and musical sound. Studio-grade 24-bit stereo FX processor with 99 factory presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects. FX send control per channel for internal FX processor and/or as external send. Main mix outputs plus separate control room, phones and stereo CD/tape outputs. CD/tape inputs assignable to main mix or control room/phones outputs. Long-wearing 60-mm logarithmic-taper fader and sealed rotary controls.Further information on the Behringer Xenyx 1002FX Mixing Desk